Contract Definitions

The following definitions apply to words frequently used in this Contract and appear in bold-faced type. Click here for a full page view. You, Your - refers to the Contract Holder named on your Identification Card or the person to whom this Contract was properly transferred. We, Us, Our - refers to the entity who is obligated to perform under this Contract , as indicated on the Identification Card. Contract - refers to this Vehicle Service Contract which You purchased from Us to protect Your Vehicle. Identification Card - refers to the numbered document (Contract Number) which should be enclosed to and becomes part of this Contract. It gives information about You, Your Vehicle, Coverage chosen and other significant data. Coverage - refers to the component protection You have chosen, as shown on the Identification Card. Your Vehicle - refers to the vehicle which is described on your Identification Card, which cannot be used for rental, emergency or for-hire purposes. Failure - refers to the Failure of a covered part under normal service. A covered part has failed when it can no longer perform the function for which it was designed solely due to its condition, and not due to the action or inaction of any non-covered parts. In addition, a Failure will be deemed to have occurred when a covered part has worn beyond the manufacturer's tolerances allowed for the particular Vehicle at the mileage when the problem occurs

“Unlike a Power Train warranty that covers only 29 parts of my car, Extended Auto Warranty Services provides me with the full coverage I need”

Coverages: What is Covered by Contract. The components Covered and other Coverages under this Contract may be subject to a deductible.

• Engine (Gas & Diesel): All internal engine parts including piston, piston rings, piston pins, crankshaft, and main bearings, connection rods and bearings, camshaft and bearings, timing chain or belt, timing gears, intake and exhaust valves, valve springs, valve guides, oil pump, push rods, rocker arms, rocker arm shafts, hydraulic and solid lifters, intake manifold, distributor shaft and housing, harmonic balancer, valve cover, timing gear cover, air cleaner and vacuum pump. The engine block and heads are also covered if damage is caused by a failure of any of the covered components.
  
  
• Engine (Rotary): All of the above listed parts, plus rotors, rotor seals, rotor chamber, eccentric shaft and bearings and all other internal parts of the rotary engine.
  
  
• Water Pump: Impeller shaft, bearings, bushings and housing.
  
  
• Turbo Charger: Internal parts, vanes, shafts, bearings, and housing if damage is caused by a failure of any of the above covered components.
  
  
• Transmission (Automatic & Standard): All internal parts, torque converter, vacuum modulator, electronic control unit and wheel sensor, and mounts. Does not include clutch assembly, pressure plate, flywheel, throughout bearing or worn synchronizers. The case is also covered if damage is caused by failure of any of the above covered items.
  
  
• Transaxle: All internal parts, transaxle mounts, vacuum modulator, torque converter, drive axle shafts, constant velocity joints, front hub and bearing assembly, pressure plate, flywheel, throughout bearing or worn synchronizers. The case is also covered if damage is caused by failure of any of the above covered items.
  
  
• Transfer Unit (4x4): Internal parts including bearings, bushings, sprockets, chains, sleeves, and gears (excluding electrical items). The transfer case is also covered if damage is caused by failure of any of the above covered items.
  
  
• Drive Axles: All internal parts, propeller shafts, "U" joints, CV joints, axle shafts, bearings and supports. The case is also covered if damage is caused by failure of any of the above covered items.
  
  
• Steering (Manual and Power): All internal parts in rack and pinion, all internal parts in recirculating ball housing, power steering pump, steering main and intermediate shafts, power cylinder assembly, pitman arm, idler arm, tie rods, tie rod ends, drag link, power steering cooler, control valve and cylinder, couplings and gear housing.
  
  
• Electrical: Alternator, electronic voltage regulator, generator, front wiper motor, starter motor, starter solenoid and manually operated switches, power window switches, power seat switches, horn button, turn signal switch, cruise control switch, headlamp switch, emergency warning flasher switch and wiper delay switch, starter drive and ring gear, electronic ignition module, heater blower motor, heated back glass, radiator fan, rear wiper motor, power door lock activator, power window motors and power seat motors.
  
  
• Front and rear suspension: Upper and lower control arm, control arm shafts and bushings, upper and lower ball joints, steering knuckles, stabilizer shaft and bushings, king pins and bushings, strut bar and bushings, spindles and spindle supports and MacPherson struts, shackle and eye bushings; automatic bearing and seals, torsion bars, stabilizer linkage and bushings.
  
  
• Brakes: Master cylinder, power assist boosters and valve, wheel cylinders, calipers, combination valve, steel lines and fittings and backing plates, power brakes cylinder, vacuum assist booster pump, springs, clips and retainers, self adjusters, rear activators, parking brake linkage and cables.
  
  
• Anti lock brakes (abs): Electronic control unit; anti lock computer module; wheel speed sensors/exciters; proportioning valves; high pressure hydraulic pump; electro hydraulic proportioning control valves; accumulator.
  
  
• Air conditioning: compressor, Internal assembly including pistons, rods, valves, bearings and shafts, clutch and pulley, condenser, evaporator, automatic temperature control programmer, accumulator; expansion valve; dryer tank; POA valve, hi/low pressure cut off switch; ducts and outlet hoses. Note: If system has R-12 refrigerant, R-12 will be used for replacement while supplies last. If R-12 is not available, the system will be converted to use R-134a refrigerant to meet environmental standards. If replacement is due to covered component failure, this Contract Holder is responsible
  
  
• Cooling: Radiator, fan clutch and fan, engine cooling fan motors; heater core.
  
  
• Fuel: Fuel tank and lines, fuel injector metering pump, fuel injectors, fuel distributor and electronic fuel pump.
  
  
• Electronics: Computerized mixture control unit and sensors and anti-detonation sensors.
  
  
• Seals & gaskets: Seals and gaskets, if needed, for covered components.
  
  
• Sport utility: Step bumpers and mounting brackets; spare tire carrier, swing arm, pivots, latches and locks; factory installed running boards; swing out mirror arms and mounts; pop-out or sliding side/rear window latches and hinges; convenience bed liner (not warpage); tailgate handle, lock, cables, hinges, latches and edge protectors; cargo lamp; tie downs. Note: Rust Damage and failure caused by rust is expressly excluded.
  
  
• High tech electrical/electronics: Factory Installed sunroof motor and its wiring harness; convertible top motor; power antenna and mast; remote keyless entry module; cruise control servo, module and transducer, compass; thermometer.